Our products advantages

MANUAL OVERRIDE ACTUATOR  Double acting

Double acting

GDV60-GDV1920

Double acting

GDV3840

  • GDV_FUNZIONAMENTO1

    Double acting operation cycle: 1. open position valve 2. closed position valve

TYPICAL AIR CONNECTION SCHEMA

The port 2 is in connection with the cylinder side chambers, supplying  the pressurised air in port 2 the standard Double Acting actuator drive shaft rotates counter clockwise to open , while the port 4 is in connection with the intermediate chamber and when pressurised the drive shaft rotates clockwise to close.

Actuator operation functionality remote control should be done by means of direct solenoid valve connection to the actuator standard interface VDE/VDI 3845 NAMUR, or by means of pipes screwed on the ports marked with the numbers 2 and 4 and connected to a separate control cabinet.

In accordance with the international standard ISO 5599-2 the actuator air ports connection position, location, orientation and form shall be clearly identified and market with the numerate 2 and 4.

  • elettrovalvola_GDV
Type DN (mm) Iso 5211 Flange Square H11 (mm) Shaft Depth (mm) Datasheet
GDV60 DN50 F04 14 16,5
GDV60 DN50 F05/F07 14 16,5
GDV106 DN60 F05/F07 17 19,3
GDV120 DN63 F05/F07 17 19,3
GDV180 DN72 F07/F10 22 24,8
GDV240 DN80 F07/F10 22 24,8
GDV360 DN90 F07/F10 22 24,3
GDV480 DN100 F10/F12 27 29,5
GDV720 DN115 F10/F12 27 29,5
GDV960 DN125 F10/F12 36 38,5
GDV960 F14
GDV1440 DN145 F12 36 38,5
GDV1440 F14
GDV1920 DN160 F12/F16 46 48,5
GDV1920 F14
GDV3840 DN208 F16 46 48,5
Actuatech S.p.a.2018-12-13
  1. Home
  2. PRODUCTS
  3. MANUAL OVERRIDE ACTUATOR
  4. Double acting