Our products advantages

STAINLESS STEEL ACTUATOR  Double acting

Double acting

GD15-GD480

Double acting

GD720-GD3840

  • GD_INOX_FUNZIONAMENTO

    Double acting operation cycle: 1. open position valve 2. closed position valve

TYPICAL AIR CONNECTION SCHEMA

The port 2 is in connection with the cylinder side chambers, supplying  the pressurised air in port 2 the standard Double Acting actuator drive shaft rotates counter clockwise to open , while the port 4 is in connection with the intermediate chamber and when pressurised the drive shaft rotates clockwise to close.

Actuator operation functionality remote control should be done by means of direct solenoid valve connection to the actuator standard interface VDE/VDI 3845 NAMUR, or by means of pipes screwed on the ports marked with the numbers 2 and 4 and connected to a separate control cabinet.

In accordance with the international standard ISO 5599-2 the actuator air ports connection position, location, orientation and form shall be clearly identified and market with the numerate 2 and 4.

  • GD_CONNECTION
Type Dn Iso Flange Square H11 Shaft Depth Datasheet
GD15 DN32 F03 9 10,1
GD30 DN40 F03 9 10,2
GD60 DN50 F03/F05 11 12,1
GD120 DN63 F05/F07 14 16,3
GD240 DN80 F05/F07 17 19,3
GD480 DN100 F07/F10 22 24,3
GD720* DN115 F10/F12 27 29,5
GD960* DN125 F12/F16 36 38,5
F14
GD1440* DN145 F12 36 38,5
F14
GD1920* DN160 F12/F16 46 48,5
GD3840* DN208 F14 46 49,5
F16

*Sizes available also in carbon steel, coating on demand.

Actuatech S.p.a.2018-12-13
  1. Home
  2. PRODUCTS
  3. STAINLESS STEEL ACTUATOR
  4. Double acting